93-100% = 4.0 = A

88-92% = 3.5 = A-/B+

83-87% = 3.0 = B

78-82% = 2.5 = B-/C+

73-77% = 2.0 = C

68-72% = 1.5 = C/D+

63-67% = 1.0 = D

58-62% = 0.5 = D-

0-57% = 0 = F

Using the Taskbar is the most straightforward way to connect to a new Wi-Fi network. Here's how:

1. Click on the wireless icon in the bottom-right corner of the taskbar. (If you don't see the button, click the up arrow button on the left.)
   Note: Alternatively, you can open Action Center (Windows key + A), and then click the Network button in the Quick actions section to access the network flyout.
2. Select the wireless network you want to connect to.
3. Check the Connect automatically option (optional).
4. Click the Connect button.
   
5. Quick Tip: If you don't see any network listed, click the Wi-Fi button to turn on the adapter.
6. Enter the network security key (password).
7. Click the Next button.
   

Once you complete these steps, you will be connected to the network using a wireless connection.

Windows 10 - How to connect to a Wi-Fi network using Settings

Using the "Network & Security" settings page, you can set up Wi-Fi connections manually, and then when your device is in range, it'll connect automatically. Here's how:

1. Open Settings.
2. Click on Network & Security.
3. Click on Wi-Fi.
4. Click the Manage known networks link.
   

Click the Add a new network button.

Enter the network name.

Use the drop-down menu to select the Security type. (Usually, the security type is WPA2-Personal AES.)

Enter the network security key (password).

1. Check the Connect automatically option.
2. Check the Connect even if this network is not broadcasting option (optional).
3. Click the Save button.

After completing these steps, your computer will connect automatically to the Wi-Fi network you specified.

Link for support article with further instructions 

Windows 7 - How to connect to Home WiFi

1. Open Connect to a network.
   From the system tray (located next to the clock), click the Wireless network icon.
   Alternate navigation: click Start > Control Panel > View network status and tasks > Connect to a network.
   
2. Click the preferred wireless network.
   Wireless networks will not be available without a module installed.
   
3. Click Connect.
   If desired, ensure Connect automatically is selected.
   
4. Enter the Security key then click OK.
   You can obtain the security key from the screen of the Jetpack or by accessing the administration page.
   

Mac and Apple - How to connect to Wifi

Link to Apple's Support Website

Click in the menu bar, then choose a network. If Wi-Fi is off, click , then select Turn Wi-Fi On.*

If you connect to a public Wi-Fi network, a window might appear with terms and conditions you're asked to agree to before you can connect.

Connect to a secure Wi-Fi network

Secure Wi-Fi networks are password-protected and have by their names. 

1. Click in the menu bar. If Wi-Fi is off, click , then choose Turn Wi-Fi On.*
2. Choose a network.
3. Enter the password, then click Join. If you don't know the password to the Wi-Fi network, contact the network administrator.

How to Use Ethernet

To connect to the Internet over a wired connection, connect an Ethernet cable between your router or modem and the Ethernet port on your Mac.

Some Macs require an Ethernet adapter like the Belkin USB-C to Gigabit Ethernet Adapter, or the Apple Thunderbolt to Gigabit Ethernet Adapter

iPhone and iPad - How to set up a Personal Hotspot

A Personal Hotspot lets you share the cellular data connection of your iPhone or iPad (Wi-Fi + Cellular) when you don't have access to a Wi-Fi network.

Set up Personal Hotspot

1. Go to Settings > Cellular or Settings > Personal Hotspot.
2. Tap the slider next to Allow Others to Join.

If you don't see the option for Personal Hotspot, contact your carrier to make sure that you can use Personal Hotspot with your plan.

Your personal hotspot will show up under your home Wifi options and you will be able to connect your hotspot to your computer. 

Android Mobile Devices - How to setup a hotspot connection

1. Open the Settings app
2. Select the Network & internet option
3. Select Hotspot & tethering
4. Tap on Wi-Fi hotspot
5. This page has options for turning the hotspot feature on and off. Additionally, you can change the network name, security type, password, and more;
6. Follow instructions to customize the hotspot feature to your liking.

Link for support article for setting up and using a hotspot on an Android mobile device

1. Open a browser such as Firefox (or any application that supports printing) and choose "Print..." from the File menu. In the print dialogue box that appears, select a printer you wish to have duplexing set as the default setting.
   
   
   
   
2. Enable the Two-Sided check box. NOTE: If you do not see a Two-sided option for this printer, you may need to enable duplex options for that printer driver.
   
   
   
   
3. Name your new preset (e.g. "Duplex") and click "OK".
   
   
   
   
4. Name your new preset (e.g. "Duplex") and click "OK". Note: you can assign this preset to be used by all printers or just the selected printer.
   
   
   
   
5. With the Duplex preset selected, hold the command key and select either the "Print" button at the bottom right or "Save as PDF..." from the PDF pulldown menu at the bottom left.
   
   
   
   Your duplexing preset is now set as the default preset.
   

   ---

Enable Duplex Options 

For some printers, drivers settings need to be modified to enable duplex printing to that device.

1. Go to System Preferences > Printers & Scanners > and select the printer you wish to enable duplex printing. 
2. Select the 'Options' tab for the printer and enable (select) the Duplex Unit checkbox and click OK.
   NOTE: You may need to relaunch the application you were printing from before these drivers settings are made available.
   
   

https://support.google.com/mail/answer/2753077

(keywords: google, contacts, ios)

Last Modified: 2015/03/17

Part-Time Faculty can view and print their teaching contract through Agresso Web / Administrative Self Service 

Prerequisites: PDF viewer application (such as Adobe Reader); Enable popups to for terra.augsburg.edu

Contracts are found through Agresso Web link on Inside Augsburg. 

To get there, follow these steps:

1. Login to Inside Augsburg (inside.augsburg.edu)
   
   
2. Click on Administrative Tasks and then Agresso Web.
   
   
3. Enter your AugNet username, AD for client, and your AugNet password.
   
   
4. Upon successful login, you will come to your Personnel Information page.
   
   
   
   
   • If you do not come to a Personnel Information screen, follow the directions, click HERE.
5. Click on the Documents button in the tool bar area.
   
   
   
6. Click "Pop-up blocked" in upper right. After a moment, the words may disappear and leave only a red "X". Choose "Always allow pop-ups from terra.augsburg.edu.
   
   
   
7. 

   (The first time you may be asked to Allow Popups for terra.augsburg.edu if you have not done so already)

8. The "Document" Archive will open.
   Under the Resource folder you will see a Faculty Contract folder.  Click on that folder.
9. On the right side you will see one or more dated contracts.  Click on the contract you wish to view.
   
   
   

   Depending on your browser, it may ask you to save or open the PDF document.  You may also get a pop-blocker message that you will need to ok, before you can view the document.

8. Close the Document Archive window.
9. Log Off done.

If you are not automatically directed to your Personnel Information screen upon login, navigate the menu to the Personnel Information screen:

1. Click on Personnel Info in the left hand menu
   
   
2. Click Personnel to expand the menu options, and then click Personnel Information.